On 4/26/07, dschrock <[EMAIL PROTECTED]> wrote:
I am running zenoss 1.1.2 (upgraded today from 1.1.1).
the main server is FreeBSD 6.2, the remote server is FreeBSD 6.1.
I set up the remote performance monitor as per section 13.2 in the admin guide
(thanks for the guide, chet!).
When i add a device on the main server, setting the performance monitor to the
remote server, no rrd files are created on either server.
Should I be adding the device through the remote server? Or is something wrong
with my set up?
Your welcome, Daniel.
I'd recommend always doing your configuration from the main Zope
instance. The only reason the remote monitors run Zope is for pulling
the graphs from the RenderServer component.
Just in case you weren't already aware of it, I should mention that
after setting a device to use a remote performance monitor you have to
wait the normal "config cycle" before the remote (or local for that
matter) monitor even knows about it. After this config cycle has taken
place the remote monitor should create the RRD files the first time it
runs through the device.
If this isn't happening you'll have to try a "zenperfsnmp run -v 10
--device=deviceInQuestion" on the remote performance monitor to get
more verbose output, and possibly the reason things aren't working as
you'd expect.
--
Chet Luther
[EMAIL PROTECTED]
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
