I have see this done other places in zenoss, but have not been able to successfully reverse engineer how to do it.
I have a APC Air Removal Unit that has 4 Fans in it. You can query the fan speeds, air flow, the whole nine yards. Here's the problem, when I query the main OID for it i get: rARUFanStatusFanFlowRate oid = .1.3.6.1.4.1.318.1.1.14.4.1.1.8 rARUFanStatusFanFlowRate.1.1 = 253 oid = .1.3.6.1.4.1.318.1.1.14.4.1.1.8.1.1 rARUFanStatusFanFlowRate.1.2 = -1 oid = .1.3.6.1.4.1.318.1.1.14.4.1.1.8.1.2 rARUFanStatusFanFlowRate.1.3 = -1 oid = .1.3.6.1.4.1.318.1.1.14.4.1.1.8.1.3 rARUFanStatusFanFlowRate.1.4 = 243 oid = .1.3.6.1.4.1.318.1.1.14.4.1.1.8.1.4 (-1 means the fan is off). But If I query the oid for an individual Fan Flow Rate, I get 450, the generic max flow rate of each fan. So it seems I can only get the correct numbers if I get the whole tree at once. The goal is to performance graph the fan flow rates for all four fans. The question is then, how do I get zenoss to parse the tree to just get one of the numbers? Any help would be greatly appreciated. -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=11740#11740 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
