Nathan, I've been monitoring a VPN3000 for quite a while.
I'm not sure what information I can provide that would help you out, but I'm happy to help out in any way I can. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Nathan Hruby > Sent: Wednesday, 05 December, 2007 20:15 > To: [email protected] > Subject: [zenoss-users] Re: cisco vpn 3005? > > On Dec 4, 2007 9:25 PM, Nathan Hruby <[EMAIL PROTECTED]> wrote: > > > I'm testing out zenoss and am having trouble getting it to see the > > interfaces and routes of our Cisco VPN 3005 via SNMP. > snmpwalk shows > > entries from IF-MIB, IP-MIB, IP-FORWARD-MIB, TCP-MIB and SNMPv2-SMI > > but zenoss doesn't seem to grok it. > > > > SNMP community in zenoss is correct, as it can see the make, > > sysLocation, etc... and can ping, etc so network > connectivity is good. > > I'm using zenoss 2.1.1 from the vmware image. Any clues as to why > > this would happen or how to start debug it? > > So, should I take it that no one has done this before? > > Runing "zenmodler run -F -v10 -d $device" shows lots of info, but > nothing as to why it's ignoring the interfaces. I also added the the > zenoss.snmp.CiscoMap and NewRoute plugins to the collector list and > lowered the zMaxOIDPerRequest value but still for naught. > > Really, no one has a Cisco 3000 series in a working/non-working state > with zenoss or has any tips on how to look at zenoss's logic while > this is happening? > > -n > -- > ------------------------------------------- > nathan hruby <[EMAIL PROTECTED]> > metaphysically wrinkle-free > ------------------------------------------- > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users > _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
