I have found that unless you are able to model the routing table for every single router on your network, the links don't really work. Either that or you have to be very selective about which networks have zDrawMapLinks = True.
To start, try navigating to /Networks, click on zProperties, set zDrawMapLinks to False, and see if all of your dots appear consistently. Then, one by one, try setting zDrawMapLinks = True only the networks that provide site to site connectivity. -mtw > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Shayne Lebrun > Sent: Thursday, 13 December, 2007 6:37 > To: [email protected] > Subject: [zenoss-users] Google Maps missing random locations on 2.1.1 > > Zenoss 2.1.1, installed from tarball. > > I have, at present, 16 locations defined. Each has, as it's > address, GPS > coordinates, in the format of xx.xxx,-xx.xx. > > If I look at the map for that particular location, I'll see > the marker for > it, and green lines extending off. Not all the lines that > should be there, > though. > > On the dashboard portlet, I'll have random dots missing, some > connections > will have the lines, some won't. Some lines are sitting where they're > supposed to be, but the markers for the location endpoints > are missing. 60 > seconds later, it refreshes itself, and this usually results > in some markers > disappearing, some appearing, and connection lines disappearing and > appearing. > > Any advice? > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users > _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
