Sorry if this should have been discoverable. I've been kicking around the wiki, quick start, and admin doc for Zenoss 2.1.1 for a day and haven't had any luck.
I have installed the VMware appliance version of the Zenoss 2.1.1 release. And, we have a heterogenous network of about 30 devices across 3 states and about 5 locations. Most are Windows based, but some are Linux and some are dedicated devices like Linksys and Cisco routers. I can't use SNMP on most of the devices due to security concerns, so I want to start simple with monitoring IP ports across the inventory for service availability on the authorized ports and also monitor that unauthorized ports are not opened. Any tips or pointers on getting successful with the least amount of pain would be appreciated. The specific task I can't see how to accomplish is how to get devices into the Zenoss monitoring cloud. As an example, I'd love to tell Zenoss to periodically scan *all* of the IP addresses in the 66.220.31.192/27 range and add a device for any IP address with any active TCP or UDP listeners. If that's too difficult or just not possible, what's the easiest way to create a device entry for each of the IP addresses and then periodically scan these devices for open ports? Thanks in advance for your responses. I'll keep looking around, and I'll capture whatever comes out of this as a HOWTO for the wiki. -Mark -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=14947#14947 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
