http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.2.1.31.1.1.1.7
I've seen some posts about 64 bit counters being handled badly recently, but since I don't deal with those, I didn't really look - you might dig around in the forum some for that info. Or perhaps your interfaces just aren't providing that info? According to what you're saying, those interfaces aren't providing any info at all, other than up/down - I assume your graphs aren't being built. Are they actually ethernet interfaces, or are they something else? In any case, if they're being detected at ethernetcsmacd, creating a new template won't help in this case, unfortunately - you may have to create "local" templates for each interface of that type - I had to do this for a few things like ATM controllers, etc, myself. Basically, go to the device, click on the drop down arrow, click on more > templates, click on create local copy for "device" and then change what you need to there. ***BE SURE TO CREATE THE LOCAL COPY BEFORE YOU START REMOVING THINGS THOUGH*** otherwise you might end up breaking things for an entire class. YMMV, just my .02, etc. -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=18301#18301 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
