Alright!!! it looks like all the mibs are loaded with the related OID's Here are the steps i took to accomplish this.
1) download all needed mibs from ftp://ftp-sj.cisco.com/pub/mibs/v2/ 2) install below mibs in the order listed: SNMPv2-SMI.my SNMPv2-TC.my SNMPv2-MIB.my RFC1213-MIB.my IF-MIB.my CISCO-SMI.my CISCO-PRODUCTS-MIB.my RFC1155-SMI CISCO-TC.my ****make sure all mibs load with OIDs listed**** When i loaded these mibs by themselves some didnt load correctly. I was able to get them all to load fully when i ran them all at once. 3) Load all other wanted mibs from the same site: ftp://ftp-sj.cisco.com/pub/mibs/v2/ Here are some suggested mibs for general monitoring CISCO-CONFIG-MAN-MIB <-----MUST change all values inside the mib from "Unsigned64" to "Unsigend32" in order for it to load CISCO-ENTITY-ALARM-MIB CISCO-ENVMON-MIB CISCO-PROCESS-MIB CISCO-SYSLOG-MIB HOST-RESOURCES-MIB IANAifType-MIB IEEE802dot11-MIB OLD-CISCO-INTERFACES-MIB OLD-CISCO-SYSTEM-MIB OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB RFC-1212 RFC-1215 RFC1155-SMI RFC1158-MIB RFC1229-MIB Hope this post help HUGE thanks to Sartuche24, sabryan and Russ for all the help -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=18969#18969 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
