Hi all I would just like to know if this is possible before I frustrate myself in a fruitless exercise...
I have an Audiocodes Mediant 8000 gateway. I am trying to graph the amount of busy channels. All I can get in the MIB is a count of active circuits per E1. I have 16 E1's per board, and two boards. I end up with this where 16 is the board number, followed by the E1 number. The result is the number of busy channels: SNMPv2-SMI::enterprises.5003.9.1.3.23.1.1.2.1.1.3.0.16.1.1 = Gauge32: 1 SNMPv2-SMI::enterprises.5003.9.1.3.23.1.1.2.1.1.3.0.16.2.1 = Gauge32: 1 SNMPv2-SMI::enterprises.5003.9.1.3.23.1.1.2.1.1.3.0.16.3.1 = Gauge32: 1 SNMPv2-SMI::enterprises.5003.9.1.3.23.1.1.2.1.1.3.0.16.4.1 = Gauge32: 2 . . . . . . Is there a way for me to find the sum of these values in order to graph them? Its quite frustrating - the Cisco I used before at least had the ability to query across the entire device :( -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=19490#19490 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
