On May 12, 2008, at 1:15 PM, swalk wrote:
I was following this guide ("http://community.zenoss.com/forums/viewtopic.php?t=5150
") to add print toner monitoring.
snmpwalk -v1 -c public 192.168.0.32 1.3.6.1.2.1.43.11.1.1.9 SNMPv2-
SMI::mib-2.43.11.1.1.9.1.1 = INTEGER: 4920
This commands produces the correct number. Yet when I added this
datasource into my template, the history always shows:
Error reading value for "toner" on HP_Printer (oid .
1.3.6.1.2.1.43.11.1.1.9 is bad)
I've even added a custom command within Zenoss and run it on the
device and it works as well.
Any idea why the template doesn't like that OID?
If you look closely at the response to your snmpwalk command you'll
see that you need one more .1 at the end of the OID you've put in the
template.
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
