You mean under the create command area of the data point?
--
James Pulver
Information Technology Area Supervisor
LEPP Computer Group
Cornell University
mgothard wrote:
jmp242 wrote:
I've been posting about doing some printer monitoring, and I'm trying to
graph how many pages were printed between the last poll and this one.
I've got a script that now outputs pages printed as an integer. This
however, is not getting graphed as an integer.
For instance, if I have 0 pages, then 2 pages, then 2 pages, then 0
pages say (in my test printer), I'm getting
cur:0.00 - which is ok, but it really ought to be 0.
avg:242.62m - ???? I have no idea what/where that's coming from - what's
m ??? I'm guessing it's doing an average of some sort.
max:1.77 - that's clearly wrong, as 2 would be the max...
And finally, the graphs don't go cleanly to 2, in fact as might be
guessed by the max:1.77, they never show 2. So you cannot see how many
pages were printed...
Is there a way to get this to work even close to what I want?
The good news is yes, you can accomplish what you want and you are not the
first to struggle with this. The bad news is that it may not be easy to do.
RRDTool takes some time to understand fully.
The fundamental problem is a conflict between the way your .rrd was initially
setup to collect data and how you want to pull data out. RRDTool is designed
to graph and store rates. In fact everything stored in an .rrd is a rate
(http://oss.oetiker.ch/rrdtool/doc/rrdcreate.en.html#IIt_s_always_a_Rate), so
your 1.77 value is probably in pages/second. This may be less than meaningful,
but you can still get good data out of RRDTool if it is setup correctly.
If you used the default Zenoss performance monitor settings you created
averages right off the bat without even knowing it, which generated the values
you see today.
Let's say you want to poll the printer every 5 minutes using your script.
You'd have to create your .rrd using something like this:
Code:
rrdtool create printerX-pages-printed.rrd --step=300 \
DS:pages:ABSOLUTE:600:0:U \
RRA:LAST:0.5:1:288 \
RRA:MAX:0.5:1:288 \
RRA:AVERAGE:0.5:288:600
The keys here are the ABSOLUTE data source type and the LAST consolidation
function. The other AVERAGE is for daily averaged data, probably more
appropriate at that level. Now you can poll the printer and stick the data in
the .rrd.
To graph this appropriately without averaging, scaling, consolidating, etc you
have to pull (and display) the data at the same interval (and multiple) you put
it in (http://oss.oetiker.ch/rrdtool/doc/rrdfetch.en.html#IRESOLUTION_INTERVAL).
From the command line I'd use this:
Code:
rrdtool graph pages.png --start=end-1day --end=now --step=300 \
--height=100 \
--width=500 \
--vertical-label=pages/5 minutes \
DEF:mypages=printerX-pages-printed.rrd:pages:LAST \
AREA:mypages#00FF00:Pages\l \
GPRINT:mypages:LAST:cur\:%0 \
GPRINT:mypages:MAX:max\:%0\j
In Zenoss all this can be done under the Performance Template section. Your
Data Point should be of Type ABSOLUTE, your Graph Point should use LAST
Consolidation, and the Format should be %0 to remove the decimal values.
I think this is correct (untested.) I'm no expert and you might have better
luck on the RRDTool lists.
-------------------- m2f --------------------
Read this topic online here:
http://community.zenoss.com/forums/viewtopic.php?p=19946#19946
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
