2008/7/31 Chet Luther <[EMAIL PROTECTED]> > On Jul 30, 2008, at 11:16 PM, katochharman wrote: > >> Can anyone guide me how to configure & get ping latency graph in Zenoss >> 2.2. >> >> In earlier versions we were able to get data and graph using rta loss >> etc.... but in Zenoss 2.2 as check_fping is not available, we are not able >> to check ping latency. >> >> Can anyone guide me. >> > > I'd recommend installing check_fping. You can get it by first installing > fping on the machine. This is likely available through your distribution's > package management system. Then download and install the full nagios-plugins > package. check_fping is part of that and will only be installed if you have > the normal fping binary on your system already. > > Chet,
I'm a bit confused by this advice. Are you saying that the nagios plugins such as check_ping aren't in the 2.2.3 install? The Admin docs seem to imply check_http is still available in $ZENHOME/libexec, see http://www.zenoss.com/community/docs/zenoss-guide/2.2.3/ch15s02.html, although I have them (check_ping etc.) in /usr/local/zenoss/common/libexec in my 2.2.3 installation. A quick run through a few templates shows the zCommandPath prop still points to the previous location (/usr/local/zenoss/libexec) from before my upgrade. Are these paths meant to be modified during an upgrade? The modified location is not on the path for the zenoss user either. -- Regards, Graham Bloice
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
