I am running Zenoss Stack V 2.2.3 It was running great for a week or so, until yesterday. Yesterday I added 31 locations (most of which have no equipment in them yet) and 2 Zenpacks (the Dell monitor and the NTP monitor). This was up until probably 5pm or so. Last night about 6:15 (after everyone had gone home) the graphs stopped. I came in this morning to find the Zenoss issues portal filled.
I restarted Zenoss and an hour and 20 min later, the graphs died again. I removed the ntp Zenpack, to no avail. It seems that, about an hour after Zenoss starts up, I loose the heartbeat for Zenmodeler, followed in about 10 min with zentrap, status, syslog, ping, win, eventlog, and command. About 10 min after command goes down, snmp and actions fail. I do a /init.d/Zenoss-stack stop followed by a start and everything is good again for an hour or so before the stuff hits the fan again. Any Suggestions? My second question I asked the other day but, since I am posting again I thought I would ask it again. Is there a way to set a priority on a class? I would like Workstations, Printers and Discovered to have a lower priority. I can do this manually but I thought applying it to the class would be the most straight forward way. Thanks; James James Alspach Systems Analyst II Shasta County Office of Education 1644 Magnolia avenue Redding, California 96003 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> (530) 225-0293 IT Hotline: 225-0279 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
_______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
