jonathonpuff wrote: > All networking gear under /Devices/Network is reading wrong interface speeds > for large bandwidth links. 1Gb/s links read properly, but port channels and > 10Gb/s links are all wrong. I'm assuming this is due to ifHighSpeed, but > where would I fix this at? This was working on my 2.1.3 before I upgraded to > 2.2.0. For instance, all my 10Gb/s links are reading 1.410Gbps :/ > > Thanks.
Just thought I'd update this post cuz I was running into the same issue. Looks like cluther fixed it here http://dev.zenoss.org/trac/changeset/9907 and it's slated for the 2.2.4 release as mentioned here http://dev.zenoss.org/trac/ticket/3585 I backed up my existing $ZENHOME/Products/ZenUtils/Utils.py and made the changes...works perfect so far on the one 3750 I've been testing with. Gotta go remodel the rest of my switches. -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=24795#24795 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
