Hello to anyone and thanks again for the help I previously received. I stumbled in a new problem working on Zenoss 2.2.3. Trying to monitor a device with a proprietary MIB i followed these steps:
- loaded the MIB to Zenoss - created a new template for the device class - added new Data Sources with the appropriate OIDs - added DataPoints therein - added a Threshold and a Graph, both refered to one of the DataPoints When I test the Data Source against the monitored device i get a response like this: Executing command against my.test.device SNMPv2-SMI::transmission.127.1.1.4.1.5.3 = INTEGER: 105 DONE in 0 seconds The DataPoint is set as GAUGE with a min of 0, a max of 1000, and no "Create Cmd" Still, on the device I get this event: Error reading value for "docsIfSigQSignalNoise" on my.test.device (oid .1.3.6.1.2.1.10.127.1.1.4.1.5 is bad) And on the performace graph, this legend: MISSING RRD FILE: my.test.device docsIfSigQSignalNoise_docsIfSigQSignalNoise (with obviously no graph line displayed) I'm not sure what got wrong in this, can anyone help? Thanks in advance, L. Carli -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=25803#25803 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
