Ok guys, try this - You do the copy, you change the name. Now try these steps, they seem to be working for me:
Stop Zenoss rm -rf $ZENHOME/var/*.zec find $ZENHOME/perf -name *.pickle -delete Restart Zenoss Now what you did there was clear out a bunch of caches. I didn't make this stuff up, its actually mentioned in the upgrade instructions in an install guide, I just applied them to this problem. After that, try waiting a while. If that's no good or you don't want to wait try this: $ZENHOME/bin/zenperfsnmp run -v10 That will go through all of your devices and tell you what's up. After clearing the caches I was getting some errors but those errors went away after a few runs. If you look at the output you should be able to see Zenoss querying all the OIDs for a device, some of which are the 64bit eth ones, here's some sample output from my setup: DEBUG:zen.RRDUtil:/data/zenoss/zenoss/perf/Devices/tools121/os/interfaces/lo/ifHCOutUcastPkts_ifHCOutUcastPkts.rrd: 23996938L Anyhow, give that a few runs, look for errors and start from there. I think if you do these steps you'll reset enough stuff to get things moving again. Hope that helps some people out there. -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=26762#26762 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
