I think you'd have to have a remote Zenoss collector setup inside the firewall. This is not well documented or easy to get working, but several in the community have written on it - see the wiki. You could also purchase Zenoss Enterprise. -- James Pulver Information Technology Area Supervisor LEPP Computer Group Cornell University
hfourie wrote, On 12/16/2008 3:29 PM: > I'm trying to monitor multiple device behind a firewall. Mostly Windows > based. The first one works fine as i open the ports on the firewall. I then > change the ports the second devices snmp runs on and then forward the port on > the firewall. all good there. > when however i add the second device with the new ports assigned, zenoss > thinks it is the same device as the ip address is the same. it then says, > wont be checked as the ip address is allready known. > > is there a way to get around this problem? > > thanks > > > > > -------------------- m2f -------------------- > > Read this topic online here: > http://forums.zenoss.com/viewtopic.php?p=29234#29234 > > -------------------- m2f -------------------- > > > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
