Hi all, Not sure if anyone can help, but I have a problem with the 64 bit ethernet counters. For some unknown reasons the returned values are out for some interface but not others. See Below
# snmpwalk -c public -v 2c 192.168.x.x 1.3.6.1.2.1.2.2.1.10 (32bit) IF-MIB::ifInOctets.1 = Counter32: 499059965 IF-MIB::ifInOctets.2 = Counter32: 1932051719 IF-MIB::ifInOctets.3 = Counter32: 1062712220 IF-MIB::ifInOctets.5 = Counter32: 0 IF-MIB::ifInOctets.6 = Counter32: 0 IF-MIB::ifInOctets.7 = Counter32: 2140404854 IF-MIB::ifInOctets.8 = Counter32: 2105147657 IF-MIB::ifInOctets.9 = Counter32: 4223502538 IF-MIB::ifInOctets.10 = Counter32: 442742587 IF-MIB::ifInOctets.11 = Counter32: 177212384 # snmpwalk -c public -v 2c 192.168.x.x 1.3.6.1.2.1.31.1.1.1.6 (64bit) IF-MIB::ifHCInOctets.1 = Counter64: 442880756905 IF-MIB::ifHCInOctets.2 = Counter64: 1393501799509 IF-MIB::ifHCInOctets.3 = Counter64: 1062712220 IF-MIB::ifHCInOctets.6 = Counter64: 0 IF-MIB::ifHCInOctets.7 = Counter64: 2140404854 IF-MIB::ifHCInOctets.8 = Counter64: 414422035866 IF-MIB::ifHCInOctets.9 = Counter64: 25698360350 IF-MIB::ifHCInOctets.10 = Counter64: 442788359 IF-MIB::ifHCInOctets.11 = Counter64: 177237392 # snmpwalk -c public -v 2c 192.168.x.x 1.3.6.1.2.1.2.2.1.2 IF-MIB::ifDescr.1 = STRING: GigabitEthernet0/0 IF-MIB::ifDescr.2 = STRING: GigabitEthernet0/1 IF-MIB::ifDescr.3 = STRING: Analysis-Module1/0 IF-MIB::ifDescr.5 = STRING: Null0 IF-MIB::ifDescr.6 = STRING: Loopback0 IF-MIB::ifDescr.7 = STRING: GigabitEthernet0/0.1 IF-MIB::ifDescr.8 = STRING: GigabitEthernet0/0.184 IF-MIB::ifDescr.9 = STRING: GigabitEthernet0/0.191 IF-MIB::ifDescr.10 = STRING: GigabitEthernet0/0.185 IF-MIB::ifDescr.11 = STRING: GigabitEthernet0/0.190 # snmpwalk -c public -v 2c 192.168.x.x 1.3.6.1.2.1.31.1.1.1.1 IF-MIB::ifName.1 = STRING: Gi0/0 IF-MIB::ifName.2 = STRING: Gi0/1 IF-MIB::ifName.3 = STRING: An1/0 IF-MIB::ifName.5 = STRING: Nu0 IF-MIB::ifName.6 = STRING: Lo0 IF-MIB::ifName.7 = STRING: Gi0/0.1 IF-MIB::ifName.8 = STRING: Gi0/0.184 IF-MIB::ifName.9 = STRING: Gi0/0.191 IF-MIB::ifName.10 = STRING: Gi0/0.185 IF-MIB::ifName.11 = STRING: Gi0/0.190 As you can see Gi0/0, Gi0/1, Gi0/0.184 and Gi0/0.191 are different when comparing to the 32 bit OID, but An1/0, Lo0, Gi0/0.1, Gi0/0.185 and Gi0/0.190 are the same/similar (commands were run seconds apart). I am certain the 64 bit values are wrong as they show terabytes and over 22 gigabyte utilisation. I've reverted back to the 32bit OID, but would like to use the 64bit onces as the interfaces are 1Gb. -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=29394#29394 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
