On Jan 18, 2009, at 9:46 PM, HummerBoy wrote: > I have a range of devices that had their network range deleted out > of the database and recreated. This has caused the interface under > the OS tab of each device on that network to loose their address > setting. Understandable really but there doesn't seem to be a way > of repopulating this detail. > It cannot be manually edited. > A remodel of the device does nothing. > Manage/Reset IP just changes the primary IP address of the device, > not the interfaces. Some of the addresses are not the devices > primary address anyway. > A rescan of the network comes up with 'Found IP '10.6.4.10' on > device 'LSTFAMC031'; skipping discovery'. > > I have had to delete all the devices and rescan the networks. Not > impressed with this as there is no bulk delete based on a search. > It is the only page that you cannot select all and delete. > > Does anyone know a easier way to repair these devices as I have > another network that I have to delete and remodel?
Remodeling the device should definitely fix this. I do this a lot to rebuild the network database. Normally I do the following from the command line after deleting all my networks to selectively only model interfaces and routes. zenmodeler run --force --collect=InterfaceMap zenmodeler run --force --collect=RouteMap _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
