After you set the community string, try remodeling the device to verify the change. You should get the instant feedback.
Thanks, Matt Ray Zenoss Community Manager community.zenoss.com [email protected] On Apr 6, 2009, at 2:48 PM, tgiorgio wrote: > I am having a problem with using SNMP. While submitting the request > for info, it isn't giving the correct public string. I used tshark > on it and here's what I got: > > Simple Network Management Protocol > version: version-1 (0) > community: public > data: get-request (0) > get-request > request-id: 2135415323 > error-status: noError (0) > error-index: 0 > variable-bindings: 1 item > Item > name: 1.3.6.1.2.1.1.3.0 > valueType: unSpecified (1) > unSpecified > > -- > I assume where it says "community:" what follows should be my > community string. Problem is it's not. Where can I define this? > I've already tried under "Edit" on the device on the Zenoss > interface. I put it under "SNMP community." This didn't work. I > also tried putting it under the zProperties, entering the string > under "zSnmpCommunities" and "zSnmpCommunity" and it didn't work. > Is there something I'm doing wrong? > > > > > -------------------- m2f -------------------- > > Read this topic online here: > http://forums.zenoss.com/viewtopic.php?p=33077#33077 > > -------------------- m2f -------------------- > > > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
