suma_pria wrote: > > mosinagant wrote: > > > > > > how do you show that green line on the first time? > > do routers interface must be on the same network? > > > > because im using MPLS, like this > > > > router 1 : > > interface serial 1 : 172.16.1.1/24 > > > > MPLS device (i dont have snmp right on this device because this is ISP > > device): > > interface serial 1 : 172.16.1.2/24 > > interface serial 2 : 172.16.2.2/24 > > > > router 2 : > > interface serial 2 : 172.16.2.1/24 > > > > > > router1 - MPLS - router 2 > > > > the question is, how i create green link between router1 and router 2?? > > > if they are already in the same network it should be show a green link, > there's a change in my network topology which is impact on my zenoss > dashboard, i try to add my new core router but it show an error when zenos > loade my new router > > 2009-07-14 09:38:49 INFO zen.Device device name '10.9.255.193' for > ip '' > 2009-07-14 09:38:50 INFO zen.Device setting hardware manufacturer > to Cisco productName to 7606 > 2009-07-14 09:38:50 INFO zen.Device setting location to /Surabaya > 2009-07-14 09:38:50 INFO zen.Device setting group ['/Router'] > 2009-07-14 09:38:50 INFO zen.Device setting performance monitor to > localhost > 2009-07-14 09:38:50 INFO zen.Utils Executing command: > /opt/zenoss/bin/zendisc run --now -d 10.9.255.193 --monitor localhost > --deviceclass /Network/Router/Cisco --weblog > 2009-07-14 09:38:53 INFO zen.ZenDisc Connecting to localhost:8789 > 2009-07-14 09:38:53 INFO zen.ZenDisc Connected to ZenHub > 2009-07-14 09:38:53 INFO zen.ZenDisc Looking for 10.9.255.193 > 2009-07-14 09:39:10 INFO zen.ZenDisc Result: Discovered device > 10.9.255.193. > 2009-07-14 09:39:10 INFO zen.ZenDisc No WMI plugins found for > 10.9.255.193 > 2009-07-14 09:39:10 INFO zen.ZenDisc No Python plugins found for > 10.9.255.193 > 2009-07-14 09:39:10 INFO zen.ZenDisc No command plugins found for > 10.9.255.193 > 2009-07-14 09:39:10 INFO zen.ZenDisc SNMP collection device > 10.9.255.193 > 2009-07-14 09:39:10 INFO zen.ZenDisc plugins: zenoss.snmp.DeviceMap, > zenoss.snmp.InterfaceMap, zenoss.snmp.RouteMap > 2009-07-14 09:39:10 INFO zen.ZenDisc No portscan plugins found for > 10.9.255.193 > 2009-07-14 09:39:20 INFO zen.SnmpClient snmp client finished collection > for 10.9.255.193 > 2009-07-14 09:39:20 INFO zen.ZenDisc processing > zenoss.snmp.DeviceMap for device 10.9.255.193 > 2009-07-14 09:39:20 INFO zen.ZenDisc Modeler > zenoss.snmp.InterfaceMap processing data for device 10.9.255.193 > 2009-07-14 09:39:20 INFO zen.ZenDisc processing zenoss.snmp.RouteMap > for device 10.9.255.193 > 2009-07-14 09:39:20 ERROR zen.ZenDisc Maximum number of routes (500) > exceeded > 2009-07-14 09:39:31 INFO zen.ZenDisc Changes in configuration applied > 2009-07-14 09:39:31 INFO zen.ZenDisc Scan time: 21.07 seconds > 2009-07-14 09:39:31 INFO zen.ZenDisc Daemon ZenDisc shutting down > 2009-07-14 09:39:32 INFO zen.ZenDisc zendisc shutting down > 2009-07-14 09:39:32 INFO zen.DeviceLoader Device 10.9.255.193 > loaded! > Navigate to device 10.9.255.193 > > > anybody help??
but i dont have snmp on MPLS device from ISP, so my router 1 and router 2 are on different network -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=36905#36905 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
