I have an odd problem, I have 6 core switches using 6513 with 10G VSS
supervisors. Since they are basicallly a SUP720 when you do a show mod on the
switch, I classified them as such for hardware. Anyways 5 of the 6 are working
and I am polling and graping the interfaces on the switch. But one of the 6 is
not mapping the interfaces nor graphing. It is just using ping. I have switched
the SNMP string under the commands to
snmpwalk -v2c -c${device/zSnmpCommunity} ${here/manageIp} system
But not matter what I do I can manually pull the info but I can not get zenoss
to do this automatically and publish to the web.
Any ideas??
Also I notice when you assign hardware to a device the next time you need to
assign that same hardware definition that you have to add it from the products
list again or it is not even an option. Is this normal?? IE sup720....
-------------------- m2f --------------------
Read this topic online here:
http://forums.zenoss.com/viewtopic.php?p=38670#38670
-------------------- m2f --------------------
_______________________________________________
zenoss-users mailing list
[email protected]
http://lists.zenoss.org/mailman/listinfo/zenoss-users
