Folks! I have been editing the snmpd.conf file for receiving process and disk space related traps. I am finally receiving alerts whenever my specified disk space is hit or whenever a process dies.
SCENARIO: I tested zenoss to see if it can receive multiple traps. I added two processes in my conf file for monitoring, restarted the snmpd daemon. I disabled both of them. In parallel i am using TCPDUMP on the cli that proves 2 traps are sent from the client to Zenoss stating the name of the 2 processes i disabled. PROBLEM: On Zenoss, i receive 1 trap with a counter =2. When i view the details tab, it shows the details of the 1st process i disabled only!!????!!???!! I am unable to understand why? to verify that Zenoss is actually receiving both the traps i logged on the Zenoss machine, executed the TCPDUMP command there too and it too shows that Zenoss machine is receiving the two traps THEN WHY ARE THEY NOT SHOWING ON THE INTERFACE? I am able to see 1 trap with a counter =2 but in the details i am able to view only 1 process name i disabled, what about the second one?? Same is the case with disk space. When i was monitoring a single file (/boot) system things were ok. But when i entered two file systems (/boot & /my) for monitoring, 1 trap is received with a counter =2 BUT in the details section results of only the first file system is mentioned. How will i know from the interface which other file system is causing problem? What am i supposed to do now? Please guide... -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=39191#39191 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
