but is that what interface your app is listening (err telling zbeacon to listen on) for beacons on?
(in addition in making sure you’re using the latest ver), follow the ZSYS_INTERFACE var a bit (it may or may not be set and be associating the beacon listener with the correct interface…) > On Nov 28, 2016, at 9:42 AM, Rodrigo Madruga <rodrigo.madr...@nexxtorage.com> > wrote: > > Broadcast messages are indeed reaching the pi, as shown by tcpdump: > > pi@raspberrypi:~ $ sudo tcpdump udp port 5670 > tcpdump: verbose output suppressed, use -v or -vv for full protocol decode > listening on wlan0, link-type EN10MB (Ethernet), capture size 262144 bytes > 13:33:56.203230 IP [REDACTED].5670 > 192.168.1.255.5670: UDP, length 22 > 13:34:01.072476 IP [REDACTED].5670 > 192.168.1.255.5670: UDP, length 22 -- wes wesyoung.me
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ zeromq-dev mailing list zeromq-dev@lists.zeromq.org http://lists.zeromq.org/mailman/listinfo/zeromq-dev
