>
> Hi Gino,
>
> Can you post the 'zpool status' for each pool and
> 'zfs get all'
> for each fs; Any interesting data in the dmesg output
> ?
sure.
1) nothing on dmesg (are you thinking about shared IRQ?)
2) Only using one pool for tests:
# zpool status
pool: zpool1
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
zpool1 ONLINE 0 0 0
raidz ONLINE 0 0 0
c4t60001FE100118DB000091190724700C7d0 ONLINE 0 0 0
c4t60001FE100118DB000091190724700C9d0 ONLINE 0 0 0
c4t60001FE100118DB000091190724700CBd0 ONLINE 0 0 0
c4t60001FE100118DB000091190724700CCd0 ONLINE 0 0 0
errors: No known data errors
3)
zpool1 type filesystem -
zpool1 creation Sat Aug 26 16:45 2006 -
zpool1 used 330G -
zpool1 available 206G -
zpool1 referenced 7.86G -
zpool1 compressratio 1.28x -
zpool1 mounted yes -
zpool1 quota none default
zpool1 reservation none default
zpool1 recordsize 128K default
zpool1 mountpoint /zpool1 default
zpool1 sharenfs ro,anon=0 local
zpool1 checksum on default
zpool1 compression off default
zpool1 atime on default
zpool1 devices on default
zpool1 exec on default
zpool1 setuid on default
zpool1 readonly off default
zpool1 zoned off default
zpool1 snapdir hidden default
zpool1 aclmode groupmask default
zpool1 aclinherit secure default
same setup up on all FS.
thanks
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
