Hello Frank, Thursday, October 19, 2006, 10:44:04 PM, you wrote:
FC> On October 19, 2006 4:26:59 PM -0400 Torrey McMahon FC> <[EMAIL PROTECTED]> wrote: >> Do you have any multipathing enabled? FC> rewind ... >> >> Frank Cusack wrote: >>> I don't have any problems with a dual attached 3511 using qle2462 cards >>> and mpxio. Not sure if that was the question or not. :-) FC> yes, mpxio. FC> (and it is enabled) FC> $ zpool status FC> pool: zfs1 FC> state: ONLINE FC> scrub: scrub completed with 0 errors on Thu Oct 19 11:11:03 2006 FC> config: FC> NAME STATE READ WRITE CKSUM FC> zfs1 ONLINE 0 0 0 FC> c1t22E4000A33001463d0 ONLINE 0 0 0 FC> errors: No known data errors FC> $ This of course does work. I guess the real question was what will happen if you now export your pool, then disable mpxio so you will see the same disk at least twice and now you decide to import that pool. Would it confuse ZFS? FC> For some reason, 'stmsboot -L' doesn't report anything, but maybe FC> that's a boot-time only thing? (No boot drives on this array.) Probably you run devfsadm -C so there're no symlinks for old device names or maybe you created LUN's after you enabled MPxIO so symlinks for non-mpxio devices were actually never created. -- Best regards, Robert mailto:[EMAIL PROTECTED] http://milek.blogspot.com _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
