Ok, so here is an update
I did restart my sysyte, I power it off and power it on. Here is screen
capture of my boot. I certainly do have some hard drive issues and will
need to take a look at them... But I got my disk back visible to the
system and zfs is doing resilvering again
Rebooting with command: boot
Boot device: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:a
File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: chrysek
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED] (glm2):
Target 6 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Error for Command: read(10) Error Level: Retryable
Requested Block: 286732066 Error Block: 286732066
Vendor: SEAGATE Serial Number: 3HY14PVS
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ:
0x0, FRU: 0x2
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED] (glm2):
Target 3 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd23):
Error for Command: read(10) Error Level: Retryable
Requested Block: 283623842 Error Block: 283623842
Vendor: SEAGATE Serial Number: 3HY8HS7L
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ:
0x0, FRU: 0x2
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED] (glm2):
SCSI bus DATA IN phase parity error
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED] (glm2):
Target 5 reducing sync. transfer rate
WARNING: /[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0 (sd25):
Error for Command: read(10) Error Level: Retryable
Requested Block: 283623458 Error Block: 283623458
Vendor: SEAGATE Serial Number: 3HY0LF18
Sense Key: Aborted Command
ASC: 0x48 (initiator detected error message received), ASCQ:
0x0, FRU: 0x2
/kernel/drv/sparcv9/zpool symbol avl_add multiply defined
/kernel/drv/sparcv9/zpool symbol assfail3 multiply defined
WARNING: kstat_create('unix', 0, 'dmu_buf_impl_t'): namespace collision
mypool2/d3 uncorrectable error
checking ufs filesystems
/dev/rdsk/c1t0d0s7: is logging.
chrysek console login: VERITAS SCSA Generic Revision: 3.5c
Dec 5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp
missing
Dec 5 13:01:38 chrysek root: CAPTURE_UPTIME ERROR: /var/opt/SUNWsrsrp
missing
Dec 5 13:01:46 chrysek VERITAS: No proxy found.
Dec 5 13:01:52 chrysek vmd[546]: ready for connections
Dec 5 13:01:53 chrysek VERITAS: No proxy found.
Dec 5 13:01:54 chrysek VERITAS: No proxy found.
Dec 5 13:02:00 chrysek VERITAS: No proxy found.
Dec 5 13:02:01 chrysek VERITAS: No proxy found.
Dec 5 13:02:03 chrysek VERITAS: No proxy found.
starting NetWorker daemons:
nsrexecd
lgtolmd
Dec 5 13:02:20 chrysek CNS Transport[841]: cctransport started
Dec 5 13:02:48 chrysek webmin[1353]: Webmin starting
Dec 5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],600000/[EMAIL
PROTECTED] (glm2):
Dec 5 13:19:07 chrysek Target 6 disabled wide SCSI mode
Dec 5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],600000/[EMAIL
PROTECTED] (glm2):
Dec 5 13:19:07 chrysek Target 6 reverting to async. mode
Dec 5 13:19:07 chrysek scsi: WARNING: /[EMAIL PROTECTED],600000/[EMAIL
PROTECTED]/[EMAIL PROTECTED],0 (sd5):
Dec 5 13:19:07 chrysek Error for Command:
write(10) Error Level: Retryable
Dec 5 13:19:07 chrysek scsi: Requested Block:
137163259 Error Block: 137163259
Dec 5 13:19:07 chrysek scsi: Vendor: SEAGATE Serial Number: 3HY14PVS
Dec 5 13:19:07 chrysek scsi: Sense Key: Aborted Command
Dec 5 13:19:07 chrysek scsi: ASC: 0x47 (scsi parity error), ASCQ:
0x0, FRU: 0x3
but now when I do zpool status -v
pool: mypool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0
errors: No known data errors
pool: mypool2
state: DEGRADED
status: One or more devices is currently being resilvered. The pool will
continue to function, possibly in a degraded state.
action: Wait for the resilver to complete.
scrub: resilver in progress, 4.40% done, 11h40m to go
config:
NAME STATE READ WRITE CKSUM
mypool2 DEGRADED 0 0 0
raidz DEGRADED 0 0 0
c3t0d0 ONLINE 0 0 0
c3t1d0 ONLINE 0 0 0
c3t2d0 ONLINE 0 0 0
c3t3d0 ONLINE 0 0 0
c3t4d0 ONLINE 0 0 0
c3t5d0 ONLINE 0 0 0
replacing DEGRADED 0 0 12
c3t6d0s0/o UNAVAIL 0 0 0 cannot open
c3t6d0 ONLINE 0 0 0
errors: No known data errors
I do see that drive... and it is doing resilvering
format works too and I dont get coredump
format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SEAGATE-ST3300007LC-D703 cyl 45265 alt 2 hd 16 sec 809>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
1. c1t1d0 <SEAGATE-ST3300007LC-D703 cyl 45265 alt 2 hd 16 sec 809>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
2. c1t2d0 <SEAGATE-ST3300007LC-D703-279.40GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
3. c1t3d0 <SEAGATE-ST3300007LC-D703-279.40GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
4. c3t0d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
5. c3t1d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
6. c3t2d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
7. c3t3d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
8. c3t4d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
9. c3t5d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
10. c3t6d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
Specify disk (enter its number): 10
selecting c3t6d0
[disk formatted]
/dev/dsk/c3t6d0s0 is part of active ZFS pool mypool2. Please see zpool(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> verify
Volume name = < >
ascii name = <SEAGATE-ST3146807LC-0007-136.73GB>
bytes/sector = 512
sectors = 286749487
accessible sectors = 286749454
Part Tag Flag First Sector Size Last Sector
0 usr wm 34 136.72GB 286733070
1 unassigned wm 0 0 0
2 unassigned wm 0 0 0
3 unassigned wm 0 0 0
4 unassigned wm 0 0 0
5 unassigned wm 0 0 0
6 unassigned wm 0 0 0
8 reserved wm 286733071 8.00MB 286749454
format> q
On Tue, 5 Dec 2006, Krzys wrote:
ok, two weeks ago I did notice one of my disk in zpool got problems.
I was getting "Corrupt label; wrong magic number" messages, then when
I looked in format it did not see that disk... (last disk) I had that
setup running for few months now and all of the sudden last disk
failed. So I ordered another disk, had it replaced like a week ago, I
did issue replace command after disk replacement, it was resilvering
disks since forever, then I got hints from this group that snaps could
be causing it so yesterday I did disable snaps and this morning I di
dnotice the same disk that I replaced is gone... Does it seem weird
that this disk would fail? Its new disk... I have Solaris 10 U2, 4
internal drives and then 7 external drives which are in single
enclousures connected via scsi chain to each other... So it seems like
last disk is failing. Those nipacks from sun have self termination so
there is no terminator at the end... Any ideas what should I do? Do I
need to order another drive and replace that one too? Or will it
happen again? What do you think could be the problem? Ah, when I look
at that enclosure I do see green light on it so it seems like it did
not fail...
format
Searching for disks...
efi_alloc_and_init failed.
done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SEAGATE-ST3300007LC-D703 cyl 45265 alt 2 hd 16 sec 809>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
1. c1t1d0 <SEAGATE-ST3300007LC-D703 cyl 45265 alt 2 hd 16 sec 809>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
2. c1t2d0 <SEAGATE-ST3300007LC-D703-279.40GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
3. c1t3d0 <SEAGATE-ST3300007LC-D703-279.40GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
4. c3t0d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
5. c3t1d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
6. c3t2d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
7. c3t3d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
8. c3t4d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
9. c3t5d0 <SEAGATE-ST3146807LC-0007-136.73GB>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
10. c3t6d0 <drive type unknown>
/[EMAIL PROTECTED],600000/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
zpool status -v
pool: mypool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
mypool ONLINE 0 0 0
mirror ONLINE 0 0 0
c1t2d0 ONLINE 0 0 0
c1t3d0 ONLINE 0 0 0
errors: No known data errors
pool: mypool2
state: DEGRADED
scrub: resilver completed with 0 errors on Mon Dec 4 22:34:57 2006
config:
NAME STATE READ WRITE CKSUM
mypool2 DEGRADED 0 0 0
raidz DEGRADED 0 0 0
c3t0d0 ONLINE 0 0 0
c3t1d0 ONLINE 0 0 0
c3t2d0 ONLINE 0 0 0
c3t3d0 ONLINE 0 0 0
c3t4d0 ONLINE 0 0 0
c3t5d0 ONLINE 0 0 0
replacing UNAVAIL 0 775 0 insufficient
replicas
c3t6d0s0/o UNAVAIL 0 0 0 cannot open
c3t6d0 UNAVAIL 0 940 0 cannot open
errors: No known data errors
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
!DSPAM:122,4575983a2243349481112!
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
