I have a cu that would like to increase a mount point with his
zpool....Cu explains below.
I need to increase the size of one of the mount points, i.e. /d01. I
need the procedure to do this while on line. attached is the information
I have on my server
as you will see I have the command "zpool status" executed and also a df
-h. I need to increase the size of /d01
I need the step by step command to do this
sr1-ubur-06 97 =>more dfh
[EMAIL PROTECTED] #
[EMAIL PROTECTED] #
[EMAIL PROTECTED] #
[EMAIL PROTECTED] # zpool status
pool: array1
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
array1 ONLINE 0 0 0
c4t600C0FF0000000000987B02C6CA32C00d0 ONLINE 0 0 0
errors: No known data errors
[EMAIL PROTECTED] #
[EMAIL PROTECTED] #
[EMAIL PROTECTED] # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 65G 5.0G 59G 8% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 15G 1.2M 15G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
/platform/sun4u-us3/lib/libc_psr/libc_psr_hwcap2.so.1
65G 5.0G 59G 8%
/platform/sun4u-us3/lib/libc_psr.so.1
/platform/sun4u-us3/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1
65G 5.0G 59G 8%
/platform/sun4u-us3/lib/sparcv9/libc_psr.so.1
fd 0K 0K 0K 0% /dev/fd
swap 15G 864K 15G 1% /tmp
swap 15G 64K 15G 1% /var/run
/dev/md/dsk/d5 27G 27M 26G 1% /d08
/dev/md/dsk/d6 27G 3.5G 23G 14% /d09
array1 803G 24K 303G 1% /array1
array1/d1 50G 35G 15G 71% /d01
array1/d2 50G 36K 50G 1% /d02
array1/d3 50G 24K 50G 1% /d03
array1/d4 175G 24K 175G 1% /d04
array1/d5 175G 24G 151G 14% /d05
Thanks for any help on this
ken
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
