You have a 6140 with SAS drives ?! When did this happen?

On Nov 17, 2007 12:30 AM, Asif Iqbal <[EMAIL PROTECTED]> wrote:
> I have the following layout
>
> A 490 with 8 1.8Ghz and 16G mem. 6 6140s with 2 FC controllers using
> A1 anfd B1 controller port 4Gbps speed.
> Each controller has 2G NVRAM
>
> On 6140s I setup raid0 lun per SAS disks with 16K segment size.
>
> On 490 I created a zpool with 8 4+1 raidz1s
>
> I am getting zpool IO of only 125MB/s with zfs:zfs_nocacheflush = 1 in
> /etc/system
>
> Is there a way I can improve the performance. I like to get 1GB/sec IO.
>
> Currently each lun is setup as primary A1 and secondary B1 or vice versa
>
> I also have write cache eanble according to CAM
>
> --
> Asif Iqbal
> PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
> _______________________________________________
> zfs-discuss mailing list
> zfs-discuss@opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
>
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to