I don't think its just b94, I recall this behavior for as long as I've had the card. I'd also be interested to know if the sun driver team has ever even tested with this card. I realize its probably not a top priority, but it sure would be nice to have it working properly.
On 8/20/08, Ross Smith <[EMAIL PROTECTED]> wrote: > >> > Without fail, cfgadm changes the status from "disk" to "sata-port" when >> > I >> > unplug a device attached to port 6 or 7, but most of the time unplugging >> > disks 0-5 results in no change in cfgadm, until I also attach disk 6 or >> > 7. >> >> That does seem inconsistent, or at least, it's not what I'd expect. > > Yup, was an absolute nightmare to diagnose on top of everything else. > Definitely doesn't happen in windows too. I really want somebody to try > snv_94 on a Thumper to see if you get the same behaviour there, or whether > it's unique to Supermicro's Marvell card. > >> > Often the system hung completely when you pulled one of the disks 0-5, >> > and wouldn't respond again until you re-inserted it. >> > >> > I'm 99.99% sure this is a driver issue for this controller. >> >> Have you logged a bug on it yet? > > Yup, 6735931. Added the information about it working in Windows today too. > > Ross > > _________________________________________________________________ > Get Hotmail on your mobile from Vodafone > http://clk.atdmt.com/UKM/go/107571435/direct/01/ _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
