This is on X86 box running solaris10
I created RAIDZ using this command. These are new disks previously under
hardware raid control on X4140
zpool create -f -m /export/content export_content raidz c0t2d0 c0t3d0 c0t4d0
c0t5d0 c0t6d0 c0t7d0
Here is the output
ech3-mes02.prod:schadala[563] ~ $ zpool status -x
pool: export_content
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://www.sun.com/msg/ZFS-8000-D3
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
export_content DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
c0t2d0 UNAVAIL 0 0 0 cannot open
c0t3d0 ONLINE 0 0 0
c0t4d0 ONLINE 0 0 0
c0t5d0 ONLINE 0 0 0
c0t6d0 ONLINE 0 0 0
c0t7d0 ONLINE 0 0 0
errors: No known data errors
I see the first disk as unavailble, How do i make it online? I run this
command, it says manual reapir needed, did anyone had this problem before?
ech3-mes03.prod:schadala[523] ~ $ sudo zpool replace -f export_content c0t2d0
invalid vdev specification
the following errors must be manually repaired:
/dev/dsk/c0t2d0s0 is part of active ZFS pool export_content. Please see
zpool(1M).
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
