For the sake of completeness, in the end I simply created links in 
/dev/rdsk for c1t0d0sX to point to my disk and was able to reactivate 
the current BE.

The shroud of mystery hasn't lifted though because when I did eventually 
reboot, I performed a reconfigure (boot -r) and the format and cfgadm 
commands now report my disk to be attached to the c1 controller.

I don't know how or why Solaris can go from detecting C1 to C5 and back 
to C1 again, but at least now ZFS and format agrees on where my disk is.

Maybe the last time I did a reconfigure was when I booted from the LiveCD ?


Caryl



On 10/07/08 11:58, Caryl Takvorian wrote:
> Hi all,
>
> Please keep me on cc: since I am not subscribed to either lists.
>
>
> I have a weird problem with my OpenSolaris 2008.05 installation (build 
> 96) on my Ultra 20 workstation.
> For some reason, ZFS has been confused and has recently starting to 
> believe that my zpool is using a device which  does not exist !
>
> prodigal:zfs #zpool status
>  pool: rpool
> state: ONLINE
> scrub: none requested
> config:
>
>    NAME        STATE     READ WRITE CKSUM
>    rpool       ONLINE       0     0     0
>      c1t0d0s0  ONLINE       0     0     0
>
> errors: No known data errors
>
>
> The c1t0d0s0 device doesn't exist on my system. Instead, my disk is 
> attached to c5t0d0s0 as shown by
>
> prodigal:zfs #format
> Searching for disks...done
>
>
> AVAILABLE DISK SELECTIONS:
>       0. c5t0d0 <DEFAULT cyl 30398 alt 2 hd 255 sec 63>
>          /[EMAIL PROTECTED],0/pci108e,[EMAIL PROTECTED]/[EMAIL PROTECTED],0
>
> or
>
> prodigal:zfs #cfgadm    Ap_Id                          Type         
> Receptacle   Occupant     Condition
> sata0/0::dsk/c5t0d0            disk         connected    configured   ok
>
>
>
> What is really annoying is that I attempted to update my current 
> OpenSolaris build 96 to the latest (b98)  by using
>
> # pkg image-update
>
> The update went well, and at the end it selected the new BE to be 
> activated upon reboot, but failed when attempting to modify the grub 
> entry because install_grub asks ZFS what is my boot device and gets 
> back the wrong device (of course, I am using ZFS as my root 
> filesystem, otherwise it wouldn't be fun).
>
> When I manually try to run install_grub, this is the error message I get:
>
> prodigal:zfs #/tmp/tmpkkEF1W/boot/solaris/bin/update_grub -R 
> /tmp/tmpkkEF1W
> Creating GRUB menu in /tmp/tmpkkEF1W
> bootadm: fstyp -a on device /dev/rdsk/c1t0d0s0 failed
> bootadm: failed to get pool for device: /dev/rdsk/c1t0d0s0
> bootadm: fstyp -a on device /dev/rdsk/c1t0d0s0 failed
> bootadm: failed to get pool name from /dev/rdsk/c1t0d0s0
> bootadm: failed to create GRUB boot signature for device: 
> /dev/rdsk/c1t0d0s0
> bootadm: failed to get grubsign for root: /tmp/tmpkkEF1W, device 
> /dev/rdsk/c1t0d0s0
> Installing grub on /dev/rdsk/c1t0d0s0
> cannot open/stat device /dev/rdsk/c1t0d0s2
>
>
> The worst bit, is that now beadm refuses to reactivate my current 
> running OS to be used upon the next reboot.
> So, the next time I reboot, my system is probably never going to come 
> back up.
>
>
> prodigal:zfs #beadm list
>
> BE            Active Mountpoint     Space   Policy Created         
> --            ------ ----------     -----   ------ -------         
> opensolaris-5 N      /              128.50M static 2008-09-09 13:03
> opensolaris-6 R      /tmp/tmpkkEF1W 52.19G  static 2008-10-07 10:14
>
>
> prodigal:zfs #export BE_PRINT_ERR=true
> prodigal:zfs #beadm activate opensolaris-5
> be_do_installgrub: installgrub failed for device c1t0d0s0.
> beadm: Unable to activate opensolaris-5
>
>
> So, how can I force zpool to accept that my disk device really is on 
> c5t0d0s0 and forget about c1?
>
> Since the file /etc/zfs/zpool.cache contains a reference to 
> /dev/dsk/c1t0d0s0  I have rebuilt the boot_archive after removing it 
> from the ramdisk, but I've got cold feet about rebooting without 
> confirmation.
>
>
> Has anyone seen this before or has any idea how to fix this situation ?
>
>
> Thanks
>
>
> Caryl
>
>

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Caryl Takvorian                     [EMAIL PROTECTED]
ISV Engineering                     phone : +44 (0)1252 420 686
Sun Microsystems UK                 mobile: +44 (0)771 778 5646



_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to