OpenSolaris 2009.06
I have a ST2540 Fiber Array directly attached to a X4150. There is a
zpool on the fiber device. The zpool went into a faulted state, but I
can't seem to get it back via scrub or even delete it? Do I have to
re-install the entire OS if I want to use that device again?
Thanks,
Mike
# zpool list
NAME SIZE USED AVAIL CAP HEALTH ALTROOT
fc-disk - - - - FAULTED -
rpool 68G 23.3G 44.7G 34% ONLINE -
scsi-disk 544G 97K 544G 0% ONLINE -
# zpool status fc-disk
pool: fc-disk
state: UNAVAIL
status: One or more devices could not be used because the label is missing
or invalid. There are insufficient replicas for the pool to
continue
functioning.
action: Destroy and re-create the pool from a backup source.
see: http://www.sun.com/msg/ZFS-8000-5E
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
fc-disk UNAVAIL 0 0
0 insufficient replicas
c0t600A0B8000389BC9000004524A7AF4BAd0 UNAVAIL 0 0
0 corrupted data
# zpool destroy fc-disk
internal error: Invalid argument
Abort (core dumped)
r...@vdi-storage:~#
_______________________________________________
zfs-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
