I accidentially only replied to cindy but I wanted to reply to the list.
I don't want to overstrain cindys time...maybe one of the list members can help 
me as well.

> -----Ursprüngliche Nachricht-----
> Von: Matthias Appel
> Gesendet: Dienstag, 08. Dezember 2009 03:34
> An: 'cindy.swearin...@sun.com'
> Betreff: AW: [zfs-discuss] Problems while resilvering
> 
> Hi Cindy,
> 
> 
> Thanks for your reply.
> 
> 
> > # zpool replace performance c1t3d0
> >
> > Then run zpool clear to clear the pool errors.
> 
> 
> Does this mean I don't have to do a cfgadm -c configure sata0/3 (which
> starts a resilver in my case) but it
> Is sufficient to do a zpool replace (I do not have a hot-spare)?
> 
> In the meantime my pool resilvered correctly after 3 or 4 resilvering
> runs (each initiated by a zpool clear)
> I don't understand why issuing a zpool clear starts a resilvering.
> 
> 
> 
> And I stumbled upon another issue:
> 
> I've worked with software RAID in an Linux environment and I am used
> that if I relocate a disk to
> another controller and the disk is found and automatically attached
> back to the existing RAID set.
> 
> I just added another controller to my system and the device changed
> from c1t0d0 to c2d0.
> 
> Zpool status gives me this:
> 
> NAME        STATE     READ WRITE CKSUM
>         performance  DEGRADED     0     0     0
>           mirror    DEGRADED     0     0     0
>             c1t0d0  UNAVAIL      0     0     0  cannot open
>             c1t1d0  ONLINE       0     0     0
>           mirror    ONLINE       0     0     0
>             c1t2d0  ONLINE       0     0     0
>             c1t3d0  ONLINE       0     0     0
> 
> How can I replace the unavailable drive wit c2do.
> I read the manpage of zpool and it only gives me the options to replace
> a disk with an empty one.
> 
> If I do a zpool replace c1t0d0 c2d0 it says that I have to use the -f
> option because the disk was in a zpool before.
> 
> Do I want to use the -f option (will the existing data be only updated
> with changed blocks or will a complete resilver
> Kick in).
> 
> If not, how can I relocate disks from one controller to another?

_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss

Reply via email to