For those who've been suffering this problem and who have non-Sun
jbods, could you please let me know what model of jbod and cables
(including length thereof) you have in your configuration.
For those of you who have been running xVM without MSI support,
could you please confirm whether the devices exhibiting the problem
are internal to your host, or connected via jbod. And if via jbod,
please confirm the model number and cables.
>For those who've been suffering this problem and who have non-Sun
jbods, could you please let me know what model of jbod and cables
>(including length thereof) you have in your configuration.
I have a SuperMicro X8DTN motheboard and an LSI SAS3081E-R, which is
firmware 1.28.02.00-IT. I have 24 drives attached to the backplane
of the system with a single mini-SAS cable probably not even 18
inches long. All the drives are WD RE4-GP.
OpenSolaris, snv_130, is running on VMWare, but I am using PCI
passthrough for the LSI card.
I tried the card and drives under Linux. Interestingly, it appears to
be causing similar messages. On top of that, I upgraded the
BIOS/firmware on the card to 1.29 (phase 17) and it made no
difference. Under OpenSolaris, bits were flipping all over the place.
It's not clear if that is happening here, but Linux just doesn't
know. Either way, the card's not behaving under Linux either.
Feb 10 09:01:17 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
Feb 10 09:01:17 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:01:18 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 10 times -
Feb 10 09:03:54 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:03:55 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 12 times -
Feb 10 09:05:39 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:05:40 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 25 times -
Feb 10 09:10:01 [cron] (root) CMD (test -x /usr/sbin/run-crons &&
/usr/sbin/run-crons )
Feb 10 09:11:15 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
Feb 10 09:11:15 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:11:17 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 13 times -
Feb 10 09:13:09 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:13:10 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 11 times -
Feb 10 09:20:01 [cron] (root) CMD (test -x /usr/sbin/run-crons &&
/usr/sbin/run-crons )
- Last output repeated 2 times -
Feb 10 09:40:06 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
Feb 10 09:40:06 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:40:07 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 10 times -
Feb 10 09:45:52 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:45:53 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 10 times -
Feb 10 09:50:01 [cron] (root) CMD (test -x /usr/sbin/run-crons &&
/usr/sbin/run-crons )
Feb 10 09:58:56 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
Feb 10 09:58:56 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 09:58:57 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 10 times -
Feb 10 10:00:01 [cron] (root) CMD (rm -f /var/spool/cron/lastrun/cron.hourly)
Feb 10 10:00:01 [cron] (root) CMD (test -x /usr/sbin/run-crons &&
/usr/sbin/run-crons )
Feb 10 10:00:01 [run-crons] (root) CMD (/etc/cron.hourly/hourly_woodchuck)
Feb 10 10:00:02 [sSMTP] Sent mail for r...@theradargun (221 2.0.0
Bye) uid=0 username=root outbytes=877
Feb 10 10:10:01 [cron] (root) CMD (test -x /usr/sbin/run-crons &&
/usr/sbin/run-crons )
- Last output repeated 3 times -
Feb 10 10:40:15 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
Feb 10 10:40:15 [kernel] mptbase: ioc1: LogInfo(0x31112000):
Originator={PL}, Code={Reset}, SubCode(0x2000)
Feb 10 10:40:17 [kernel] mptbase: ioc1: LogInfo(0x31123000):
Originator={PL}, Code={Abort}, SubCode(0x3000)
- Last output repeated 11 times -
--
Maurice Volaski, maurice.vola...@einstein.yu.edu
Computing Support, Rose F. Kennedy Center
Albert Einstein College of Medicine of Yeshiva University
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
