I have another very weird one, looks like a reoccurance of the same issue but
with the new firmware.
We have the following disks:
AVAILABLE DISK SELECTIONS:
0. c7t1d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,0
1. c7t1d1 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,1
2. c7t1d2 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,2
3. c7t1d3 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,3
4. c7t1d4 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,4
5. c7t1d5 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,5
6. c7t1d6 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,6
7. c7t1d7 <DEFAULT cyl 60797 alt 2 hd 255 sec 126>
/p...@0,0/pci8086,3...@3/pci17d3,1...@0/d...@1,7
rpool uses c7d1d7
# zpool status
pool: rpool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c7t1d7s0 ONLINE 0 0 0
errors: No known data errors
I tried to create the following tank:
zpool create -f tank \
raidz2 \
c7t1d0 \
c7t1d1 \
c7t1d2 \
c7t1d3 \
c7t1d4 \
c7t1d5 \
spare \
c7t1d6
# ./mktank.sh
invalid vdev specification
the following errors must be manually repaired:
/dev/dsk/c7t1d7s0 is part of active ZFS pool rpool. Please see zpool(1M).
So clearly, it confuses one of the other drives with c7t1d7
What's even weirder - this is after a clean reinstall of solaris (it's a test
box).
Any ideas on how to clean the state?
James, if you read this, is this the same issue?
Thanks in advance,
Moshe
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
