ok - i tried to follow the troubleshooting instructions - but i ran into the
same problem at step 5 - the attach:
init...@dogpatch:~# zpool attach rpool c7t0d0s0 c7t1d0s0
invalid vdev specification
use '-f' to override the following errors:
/dev/dsk/c7t1d0s0 overlaps with /dev/dsk/c7t1d0s2
and, of course, they overlap, since s2 is the entire disk:
init...@dogpatch:~# prtvtoc /dev/rdsk/c7t1d0s0
* /dev/rdsk/c7t1d0s0 partition map
*
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 255 tracks/cylinder
* 16065 sectors/cylinder
* 36471 cylinders
* 36469 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
*
* Unallocated space:
* First Sector Last
* Sector Count Sector
* 0 16065 16064
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 0 00 16065 585858420 585874484
2 5 01 0 585874485 585874484
8 1 01 0 16065 16064
the only difference, that i can see right off, with the format method and in
the other instructions that used fmthard is that the tags are 0,5,1 instead of
2,5,1 - but the slices(partitions) still overlap. should i use "-f" to force it
to run, as the error message suggests - the toubleshooting instructions show
overlapping partitions as well, but they don't show a "-f" at step 5. i was
hoping the tag difference was the "magic". am i overlooking something and
making a mistake?
--
This message posted from opensolaris.org
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
