On 05/17/10 12:08 PM, Thomas Burgess wrote:
well, i haven't had a lot of time to work with this...but i'm having
trouble getting the onboard sata to work in anything but NATIVE IDE mode.
I'm not sure exactly what the problem is....i'm wondering if i bought
the wrong cable (i have a norco 4220 case so the drives connect via a
sas sff-8087 on the backpane)
I thought this required a "reverse breakout cable" but maybe i was
wrong....this is the first time i've worked with sas
on the otherhand, I was able to flash my intel Intel SASUC8I cards
with the LSI SAS3081E IT firmware from the LSI site. These seem to
work fine. I think i'm just going to order a 3rd card and put it in
the pci-e x4 slot. I don't want 16 drives running as sata and 4
running in IDE mode. Is there any way i can tell if the drive i
installed opensolaris to is in IDE or SATA mode?
Does it show up in cfgadm?
--
Ian.
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
