This didn't work for me. I had the exact same issue a few days ago. My motherboard had the following:
Native IDE AHCI RAID Legacy IDE so naturally i chose AHCI, but it ALSO had a mode called "IDE/SATA combined mode" I thought i needed this to use both the ide and ant sata ports, turns out it was basically an ide emulation mode for sata, long story short i ended up with opensolaris installed in IDE mode. I had to reinstall. I tried the livecd/import method and it still failed to boot. On Sat, May 22, 2010 at 5:30 PM, Ian Collins <i...@ianshome.com> wrote: > On 05/23/10 08:52 AM, Thomas Burgess wrote: > >> If you install Opensolaris with the AHCI settings off, then switch them >> on, it will fail to boot >> >> >> I had to reinstall with the settings correct. >> >> Well you probably didn't have to. Booting form the live CD and importing > the pool would have put things right. > > -- > Ian. > >
_______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
