On 2/1/11 5:52 PM, Krunal Desai wrote:
SMART status was reported healthy as well (got smartctl kind of
working), but I cannot read the SMART data of my disks behind the
1068E due to limitations of smartmontools I guess. (e.g. 'smartctl -d
scsi -a /dev/rdsk/c10t0d0' gives me serial #, model, and just a
generic 'SMART Ok'). I assume that SUNWhd is licensed only for use on
the X4500 Thumper and family? I'd like to see if it works with the
1068E.
Works For Me (TM).
c7t0d0 is hanging off an LSI SAS3081E-R (SAS1068E chip) rev B3 MPT rev
105 Firmware rev 011d0000 (1.29.00.00) (IT FW)
This is a SATA disk - I don't have any SAS disks behind a LSI1068E to test.
# uname -a
SunOS gandalf.taltos.org 5.11 snv_151a i86pc i386 i86pc
# /usr/local/sbin/smartctl -H -i -d sat /dev/rdsk/c7t0d0
smartctl 5.40
2010-10-16 r3189 [i386-pc-solaris2.11] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11 family
Device Model: ST31500341AS
Serial Number: 9VS4HDYH
Firmware Version: CC1H
User Capacity: 1,500,301,910,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Feb 2 17:37:56 2011 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
_______________________________________________
zfs-discuss mailing list
zfs-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
