I am trying to mount a WD 2.5TB external drive (was IFS:NTFS) to my OSS box.
After connecting it to my Ultra24, I ran "pfexec fdisk /dev/rdsk/c5t0d0p0" and changed the Type to EFI. Then, "format -e" or "format" showed the disk was config with 291.10GB only. Selecting a disk would crash my OSS box. The same if I connected it to a s10x box. Anything I am missing in order to format the disk with EFI label and creating a zpool with it? Here is some screen shots ====================== --- If it were attached to the OSS box 2. Logical Node: /dev/rdsk/c5t0d0p0 <---------- WD2.5TB ext disk Physical Node: /p Access permissions: Medium is not write protected. # format -e Searching for disks...done c5t0d0: configured with capacity of 291.10GB AVAILABLE DISK SELECTIONS: 0. c3t0d0 <DEFAULT cyl 36469 alt 2 hd 255 sec 63> /pci@0,0/pci8086,2940@1c/pci1000,3091@0/sd@0,0 1. c3t1d0 <DEFAULT cyl 36469 alt 2 hd 255 sec 63> /pci@0,0/pci8086,2940@1c/pci1000,3091@0/sd@1,0 2. c3t2d0 <SEAGATE-ST330055SSUN300G-0791-279.40GB> /pci@0,0/pci8086,2940@1c/pci1000,3091@0/sd@2,0 3. c3t3d0 <SEAGATE-ST330055SSUN300G-0791-279.40GB> /pci@0,0/pci8086,2940@1c/pci1000,3091@0/sd@3,0 4. c5t0d0 <WD-Ext HDD 1021-2021-291.10GB> /pci@0,0/pci108e,5351@1d,7/storage@5/disk@0,0 Specify disk (enter its number): pfexec fdisk /dev/rdsk/c5t0d0p0 Total disk size is 60800 cylinders Cylinder size is 80325 (512 byte) blocks Cylinders Partition Status Type Start End Length % ========= ====== =========== ===== === ====== === 1 EFI 0 7600 7601 14 --- if it were attached to a s10x box, it would crash after running "format" or "format -e" and select the disk. # Jun 20 15:35:09 swsdlcmir1 su: 'su root' succeeded for kitty on /dev/pts/3 panic[cpu0]/thread=fffffe80000c5c60: BAD TRAP: type=e (#pf Page fault) rp=fffffe80000c5a10 addr=ffffffffa212a000 sched: #pf Page fault Bad kernel fault at addr=0xffffffffa212a000 pid=0, pc=0xfffffffffb8367ca, sp=0xfffffe80000c5b08, eflags=0x10216 cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f0<xmme,fxsr,pge,mce,pae,pse> cr2: ffffffffa212a000 cr3: 128ec000 cr8: c rdi: ffffffffa212a000 rsi: fffffe84dd4327d0 rdx: 4000 rcx: 506 r8: fffffe84def9a258 r9: ffffffff9b3f133a rax: 0 rbx: 4000 rbp: fffffe80000c5b50 r10: ffffffff800f5000 r11: 34 r12: fffffe84d2318c00 r13: 0 r14: ffffffffa0f2fe40 r15: ffffffff9b3f1300 fsb: ffffffff80000000 gsb: fffffffffbc29cc0 ds: 43 es: 43 fs: 0 gs: 1c3 trp: e err: 2 rip: fffffffffb8367ca cs: 28 rfl: 10216 rsp: fffffe80000c5b08 ss: 30 fffffe80000c5920 unix:real_mode_end+7f81 () fffffe80000c5a00 unix:trap+5e6 () fffffe80000c5a10 unix:_cmntrap+140 () fffffe80000c5b50 unix:bcopy_altentry+55a () fffffe80000c5b60 ehci:ehci_handle_bulk_qtd+3f () fffffe80000c5b80 ehci:ehci_handle_normal_qtd+2e () fffffe80000c5bc0 ehci:ehci_traverse_active_qtd_list+5f () fffffe80000c5bf0 ehci:ehci_intr+e4 () fffffe80000c5c40 unix:av_dispatch_autovect+78 () fffffe80000c5c50 unix:intr_thread+5f () panic: entering debugger (continue to save dump) Welcome to kmdb kmdb: unable to determine terminal type: assuming `vt100' Loaded modules: [ crypto cpc uppc neti ptm ufs unix cpu_ms.AuthenticAMD.15 zfs krtld s1394 uhci hook lofs genunix ip logindmux usba specfs pcplusmp md nfs random cpu.generic sctp arp ] [0]> Thanks, Kitty -- This message posted from opensolaris.org _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
