Help - I've got a bad disk in a zpool and need to replace it. I've
an extra drive that's not being used, although it's still marked
it's in a pool. So I need to get the "xvm" pool destroyed, c0t5d0
marked as available, and replace c0t3d0 with c0t5d0.|
root@kc-x4450a # zpool status -xv
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
scrub: none requested
NAME STATE READ WRITE CKSUM
vms UNAVAIL 0 3 0 insufficient replicas
c0t2d0 ONLINE 0 0 0
c0t3d0 UNAVAIL 0 6 0 experienced I/O failures
c0t4d0 ONLINE 0 0 0
errors: Permanent errors have been detected in the following files:
root@kc-x4450a # zpool replace -f vms c0t3d0 c0t5d0
cannot replace c0t3d0 with c0t5d0: pool I/O is currently suspended
root@kc-x4450a # zpool import
status: The pool was last accessed by another system.
action: The pool can be imported despite missing or damaged devices. The
fault tolerance of the pool may be compromised if imported.
c0t4d0 FAULTED corrupted data
_______________________________________________ zfs-discuss mailing list firstname.lastname@example.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss