On 5/14/12 2:02 AM, Ian Collins wrote:
Adding the log was OK:

zpool add -f export log mirror c10t3d0s0 c10t4d0s0

But adding the cache fails:

zpool add -f export cache c10t3d0s1 c10t4d0s1
invalid vdev specification
the following errors must be manually repaired:
/dev/dsk/c10t3d0s2 is part of active ZFS pool export. Please see zpool(1M).
/dev/dsk/c10t3d0s1 overlaps with /dev/dsk/c10t3d0s2

The only solution I know of is to get rid of the whole-disk slice s2 from the disk label. I ended up using prtvtoc to dump the table, editing it by hand, and feeding it to fmthard.

You could also try making s0 start at cylinder 1 instead of zero, so zpool doesn't see a magic number on s2, but I don't know if that will be enough.


zfs-discuss mailing list

Reply via email to