Like I said, very helpful fella.

--
Jason Belec
Sent from my iPad

> On Feb 17, 2014, at 8:18 PM, ilove...@icloud.com wrote:
> 
> Hey, this is ilovezfs.
> 
> I think there may be some confusion here as to what each of these versions 
> are. For example, you referenced the command:
> 
> sudo zpool create -O casesensitivity=insensitive -O normalization=formD -O 
> ashift=12 POOLNAME mirror /dev/diskXsX /dev/diskXsX
> 
> which is not a command that would work on MacZFS 74.x.x.
> 
> MacZFS 74.3.x is the same as MacZFS 74.2.x, but simply upgraded to work with 
> Mavericks.
> MacZFS 74.2.x/74.3.x is pool version 8, zfs file system version 2.
> 
> My "zfsadm" script is not related to MacZFS 74. It is for the newer, OpenZFS 
> based version of ZFS for OS X, which has been referred to variously as 
> "ZFS-OSX," and "OSX-ZFS," "MacZFS 99," "MacZFS prototype generation," and 
> "MacZFS experimental generation."  The GitHub repository 
> https://github.com/zfs-osx has the code for this version.
> 
> https://github.com/zfs-osx (like every implementation of OpenZFS) is pool 
> version 5000, file system version 5. For reference, ZEVO is pool version 28, 
> file system version 5. There is a comparison table here: 
> http://bitly.com/osxzfs
> 
> If you want to use MacZFS 74, I suggest that you run the command
> 
> sudo nvram boot-args="keepsyms=y"
> 
> and reboot. Then you should install MacZFS 74.3.2b and reboot. If you get a 
> kernel panic, post your panic report here. The panic reports are in 
> /Library/Logs/DiagnosticReports.
> 
> In my opinion, using MacZFS 74.3.1 is not a good answer, given that it has 
> been fully superseded by MacZFS 74.3.2b. If there is a kernel panic in 
> 74.3.2b that you have discovered, that must be dealt with not avoided. 
> However, the kernel panic is likely attributable to a problem with your setup 
> given that others are using 74.3.2b without a panic, in which case that 
> problem in your setup needs to be resolved, not avoided.
> 
> If instead you want to use https://github.com/zfs-osx/zfs, then yes I'd 
> recommend using https://gist.github.com/ilovezfs/7713854. A tutorial 
> explaining one way it can be used is here: 
> http://zerobsd.tumblr.com/post/62586498252/os-x-with-zfs.
> 
> If you have questions, the IRC channel is #mac-zfs on freenode. Colloquy 
> http://colloquy.info/ is a user-friendly client.
> 
>> On Monday, February 17, 2014 4:37:24 PM UTC-8, Robert Rehnmark wrote:
>> Thank you for your help.
>> I'll see if I have to do it this way.
>> I got my hands on the 74.3.1 and it installed and is running.
>> Is there something about this version that I should know and or stay away 
>> from?
>> 
>> Again, thanks a lot.
>> 
>> /Robert
>> 
>> 
>> 
>>> Den tisdagen den 18:e februari 2014 kl. 01:12:15 UTC+1 skrev jasonbelec:
>>> Https://gist.github.com/ilovezfs/7713854
>>> 
>>> This is the script that should pull everything and build. Instructions are 
>>> in the script for the script.
>>> You will need a Developer folder in your Home directory, see script. You 
>>> will need to chmod the script to run. Then sudo ./zfsadmin to run, and 
>>> options like -l to load after build as per instructions in the script. You 
>>> will need sudo to run commands like sudo zpool list. Until you make the 
>>> install permanent. IRC is a great bunch of people working pretty much 
>>> around the clock.
>>> 
>>> You can check the developer section of the MacZFS site for more info.
>>> 
>>> Oh, and your doing all this at your own risk. ;) Seriously. 
>>> 
>>> 
>>> 
>>> --
>>> Jason Belec
>>> Sent from my iPad
>>> 
>>>> On Feb 17, 2014, at 6:38 PM, Robert Rehnmark <xca...@gmail.com> wrote:
>>>> 
>>>> I got Mavericks up and running nicely but the 74.3.2b made it panic at 
>>>> boot.
>>>> So what do I install instead?
>>>> And how do I do that?
>>>> This ilovezfs, does he/she have this info and script on a webpage 
>>>> somewhere or can I only get it by contact through IIRC?
>>>> 
>>>> /Robert
>>>> 
>>>> 
>>>> 
>>>>> Den måndagen den 17:e februari 2014 kl. 18:51:51 UTC+1 skrev jasonbelec:
>>>>> Well actually ilovezfs has a wonderful little script that does all the 
>>>>> magic for you and he seems quite happy to share on the IIRC chat room. It 
>>>>> helped me see several things I was doing wrong. From that script you can 
>>>>> then move the important files into the proper places and grant them 
>>>>> permission, same that the downloadable build does. All pretty easy and 
>>>>> repeatable on the command line.
>>>>> 
>>>>> 
>>>>> --
>>>>> Jason Belec
>>>>> Sent from my iPad
>>>>> 
>>>>>> On Feb 17, 2014, at 12:15 PM, Rob Freedomfighter <xca...@gmail.com> 
>>>>>> wrote:
>>>>>> 
>>>>>> Ok, is it hard to build it?
>>>>>> Do I need knowledge in excess of just some simple terminal commands I 
>>>>>> can copy and paste?
>>>>>> 
>>>>>> Thanks for bearing with me.
>>>>>> 
>>>>>> /Robert
>>>> 
>>>> -- 
>>>>  
>>>> --- 
>>>> You received this message because you are subscribed to the Google Groups 
>>>> "zfs-macos" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>>> email to zfs-macos+...@googlegroups.com.
>>>> For more options, visit https://groups.google.com/groups/opt_out.
> 
> -- 
>  
> --- 
> You received this message because you are subscribed to the Google Groups 
> "zfs-macos" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to zfs-macos+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.

-- 

--- 
You received this message because you are subscribed to the Google Groups 
"zfs-macos" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to zfs-macos+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to