New day, new cables.

Now the computer recognizes the two ZFS arrays, but once again I cannot 
read from or write to them.

Old array:

> anderswallen:~ anderswa$ sudo zpool status -v
>
>   pool: array
>
>  state: ONLINE
>
> status: One or more devices are faulted in response to IO failures.
>
> action: Make sure the affected devices are connected, then run 'zpool 
> clear'.
>
>    see: http://zfsonlinux.org/msg/ZFS-8000-HC
>
>   scan: none requested
>
> config:
>
>
>  NAME          STATE     READ WRITE CKSUM
>
> array         ONLINE       1     6     0
>
>   raidz2-0    ONLINE       4    18     0
>
>     disk10s2  ONLINE       1    14     0
>
>     disk11s2  ONLINE       1    16     0
>
>     disk12s2  ONLINE       1    16     0
>
>     disk13s2  ONLINE       0    18     0
>
>     disk14s2  ONLINE       0    14     0
>
>     disk15s2  ONLINE       0    14     0
>
>     disk16s2  ONLINE       0    14     0
>
>
> errors: List of errors unavailable (insufficient privileges)
>
> anderswallen:~ anderswa$ sudo zpool clear -F array
>
> cannot clear errors for array: I/O error
>
>
New array:

>   pool: array_2
>  state: UNAVAIL
> status: One or more devices are faulted in response to IO failures.
> action: Make sure the affected devices are connected, then run 'zpool 
> clear'.
>    see: http://zfsonlinux.org/msg/ZFS-8000-HC
>   scan: resilvered 12,5K in 0h0m with 0 errors on Mon Nov  3 18:00:02 2014
> config:
> NAME         STATE     READ WRITE CKSUM
> array_2      UNAVAIL      0     0     0  insufficient replicas
>   raidz2-0   UNAVAIL      0     0     0  insufficient replicas
>     disk2s2  FAULTED     30     0     0  too many errors
>     disk3s2  FAULTED     27     0     0  too many errors
>     disk4s2  FAULTED     24     0     0  too many errors
>     disk5s2  FAULTED     21     0     0  too many errors
>     disk6s2  FAULTED     18     0     0  too many errors
>     disk7s2  FAULTED     15     0     0  too many errors
>     disk8s2  FAULTED     12     0     0  too many errors
>     disk9s2  FAULTED      9     0     0  too many errors
> errors: List of errors unavailable (insufficient privileges)
> anderswallen:~ anderswa$ sudo zpool clear -F array_2
> cannot clear errors for array_2: I/O error



 Where do we go from here?

-- 

--- 
You received this message because you are subscribed to the Google Groups 
"zfs-macos" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to zfs-macos+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to