Cool, getting somewhere. Can you give a quick rundown how things are connected 
in your system and what cables are between various elements to provide a better 
picture. What kind of controller for the drives, etc...?

Jason Belec
Sent from my "It's an iPod, a Phone, and an Internet Device..."

> On Nov 18, 2014, at 2:27 PM, Anders Wallén <anders_wal...@mac.com> wrote:
> 
> New day, new cables.
> 
> Now the computer recognizes the two ZFS arrays, but once again I cannot read 
> from or write to them.
> 
> Old array:
>> anderswallen:~ anderswa$ sudo zpool status -v
>>   pool: array
>>  state: ONLINE
>> status: One or more devices are faulted in response to IO failures.
>> action: Make sure the affected devices are connected, then run 'zpool clear'.
>>    see: http://zfsonlinux.org/msg/ZFS-8000-HC
>>   scan: none requested
>> config:
>> 
>>      NAME          STATE     READ WRITE CKSUM
>>      array         ONLINE       1     6     0
>>        raidz2-0    ONLINE       4    18     0
>>          disk10s2  ONLINE       1    14     0
>>          disk11s2  ONLINE       1    16     0
>>          disk12s2  ONLINE       1    16     0
>>          disk13s2  ONLINE       0    18     0
>>          disk14s2  ONLINE       0    14     0
>>          disk15s2  ONLINE       0    14     0
>>          disk16s2  ONLINE       0    14     0
>> 
>> errors: List of errors unavailable (insufficient privileges)
>> anderswallen:~ anderswa$ sudo zpool clear -F array
>> cannot clear errors for array: I/O error
> 
> New array:
>>   pool: array_2
>>  state: UNAVAIL
>> status: One or more devices are faulted in response to IO failures.
>> action: Make sure the affected devices are connected, then run 'zpool clear'.
>>    see: http://zfsonlinux.org/msg/ZFS-8000-HC
>>   scan: resilvered 12,5K in 0h0m with 0 errors on Mon Nov  3 18:00:02 2014
>> config:
>>      NAME         STATE     READ WRITE CKSUM
>>      array_2      UNAVAIL      0     0     0  insufficient replicas
>>        raidz2-0   UNAVAIL      0     0     0  insufficient replicas
>>          disk2s2  FAULTED     30     0     0  too many errors
>>          disk3s2  FAULTED     27     0     0  too many errors
>>          disk4s2  FAULTED     24     0     0  too many errors
>>          disk5s2  FAULTED     21     0     0  too many errors
>>          disk6s2  FAULTED     18     0     0  too many errors
>>          disk7s2  FAULTED     15     0     0  too many errors
>>          disk8s2  FAULTED     12     0     0  too many errors
>>          disk9s2  FAULTED      9     0     0  too many errors
>> errors: List of errors unavailable (insufficient privileges)
>> anderswallen:~ anderswa$ sudo zpool clear -F array_2
>> cannot clear errors for array_2: I/O error
> 
> 
>  Where do we go from here?
> -- 
> 
> --- 
> You received this message because you are subscribed to the Google Groups 
> "zfs-macos" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to zfs-macos+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

-- 

--- 
You received this message because you are subscribed to the Google Groups 
"zfs-macos" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to zfs-macos+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to