On Mon, 2007-04-30 at 19:48 -0400, Jeff Victor wrote:
> I don't know about other people, but I would need more configuration 
> information before beginning to untangle this.

Okay.  Just wasn't sure what, so here's more info, in the global zone:

$ cat /etc/ipf/ipnat.conf 
# allow any 192.168.1.x zone to use the internet
map e1000g0 192.168.1.0/24 -> 0/32 proxy port ftp ftp/tcp
map e1000g0 192.168.1.0/24 -> 0/32 portmap tcp/udp auto
map e1000g0 192.168.1.0/24 -> 0/32

$ cat /etc/ipf/ipf.conf 
#
# ipf.conf
#
# IP Filter rules to be loaded during startup
#
# See ipf(4) manpage for more information on
# IP Filter rules syntax.
pass in quick all keep state keep frags
pass out quick all keep state keep frags

The local zone is a whole root zone on zfs, with the following
network config:

  <network address="192.168.1.3" physical="e1000g0"/>

# ifconfig e1000g0:2
e1000g0:2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 2
        zone xfce
        inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255
# netstat -nr

Routing Table: IPv4
  Destination           Gateway           Flags  Ref     Use     Interface 
-------------------- -------------------- ----- ----- ---------- --------- 
default              129.156.226.1        UG        1         40           
default              192.168.1.254        UG        1        177           
129.156.226.0        129.156.226.169      U         1         74 e1000g0   
129.156.226.0        192.168.1.2          U         1          0 e1000g0:1 
192.168.1.0          192.168.1.2          U         1         19 e1000g0:1 
224.0.0.0            129.156.226.169      U         1          0 e1000g0   
127.0.0.1            127.0.0.1            UH        1         82 lo0       

In the zone:

# ifconfig -a
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
        inet 127.0.0.1 netmask ff000000 
e1000g0:2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu
1500 index 2
        inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255
# netstat -nr

Routing Table: IPv4
  Destination           Gateway           Flags  Ref     Use     Interface 
-------------------- -------------------- ----- ----- ---------- --------- 
default              192.168.1.254        UG        1        177           
192.168.1.0          192.168.1.3          U         1         76 e1000g0:2 
224.0.0.0            192.168.1.3          U         1          0 e1000g0:2 
127.0.0.1            127.0.0.1            UH        1          0 lo0:1     

# ping someserv
someserv is alive
# ls /net/someserv
/net/someserv: No such file or directory
# ssh [EMAIL PROTECTED]
Password: 
Last login: Thu Apr 26 17:28:43 2007 from foo
Sun Microsystems Inc.   SunOS 5.10      Generic January 2005

In the global zone ls /net/someserv works fine.

Not sure what else may be relevant.

Thanks,
Laca

> Laszlo (Laca) Peter wrote:
> > Hi,
> > 
> > I'm trying to set up zones with NAT on snv_60.
> > I followed the instructions found in various blogs and web pages
> > and got it mostly working, but I'm having trouble with certain
> > NFS mounts.  ls /net/somehost works but ls /net/someotherhost
> > doesn't.  I'm getting No such file or directory from the zone
> > (works fine from the global zone).
> > Similar issue with the automounted home directories:
> > ls /home/myuser reports permission denied.
> > 
> > At least some of the servers that I can't access are using
> > NFSv3, in case that matters.
> > 
> > I'm probably missing something obvious, but what is it?
> > 
> > Thanks,
> > Laca
> 
> 

_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

Reply via email to