Hi All,

I have set up 2 non-global zones with 2 seperate ip's on a different subnet. I 
have also set up one extra ip of same subnet in global zone for networking b/w 
global and no gloabal zones.

I have a 100MBPS NIC and want to limit bandwidth 1MBPS each for my non global 
zones. I have never used IPQoS before thus I'm trying to limit ftp traffic at 
first.
I've written following files but my Ftp traffic is not affected. 

Can someone help me identify the problem?

Thanks in Advance,
Manish

My IPQoS config file:-
^^^^^^^^^^^^^^^^^^
fmt_version 1.0
action {
        module ipgpc
        name ipgpc.classify
        params {
                global_stats TRUE
        }
        class {
                name ftp_traffic
                next_action  ftpcap
                enable_stats FALSE
        }
        filter {
                name ftp_out1
                saddr 192.168.0.3
                daddr 192.168.0.1
                sport 20
                direction LOCAL_OUT
                class ftp_traffic
        }
        filter {
                name ftp_in1
                daddr 192.168.0.3
                saddr 192.168.0.2
                sport 20
                direction LOCAL_IN
                class ftp_traffic
        }
        filter {
                name ftp_in2
                daddr 192.168.0.3
                saddr 192.168.0.1
                sport 20
                direction LOCAL_IN
                class ftp_traffic
        }
        filter {
                name ftp_out2
                saddr 192.168.0.3
                daddr 192.168.0.2
                sport 20
                direction LOCAL_OUT
                class ftp_traffic
        }
}


action {
        module tokenmt
        name ftpcap
        params {
                committed_rate 1048
                committed_burst 1048
                peak_burst 1048
                red_action_name continue
                green_action_name continue
                yellow_action_name continue
                global_stats TRUE
        }
}

Network configuration of my machine:-
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 
index 1
        inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 
index 1
        zone zone1
        inet 127.0.0.1 netmask ff000000
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 
index 1
        zone mzone
        inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 172.16.41.22 netmask ffffff00 broadcast 172.16.41.255
        ether 0:13:d3:40:d1:ba
bge0:1: flags=4001000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        zone zone1
        inet 192.168.0.1 netmask ffffff00 broadcast 192.168.0.255
bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        zone mzone
        inet 192.168.0.2 netmask ffffff00 broadcast 192.168.0.255
bge0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.0.3 netmask ffffff00 broadcast 192.168.0.255
------------------------------------------------------------------------------------------
 
 
This message posted from opensolaris.org
_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

Reply via email to