Re: [zones-discuss] Cannot ping gateway from zone

Fri, 31 Aug 2007 15:43:17 -0700

Could you briefly explain what did you do to fix it and what actions did you commit since then ...? 

Asif Iqbal wrote:
good catch! however I fixed then since then. That was the only thing that was wrong 

I still have same problem.
On 8/31/07, Ihsan Zaghmouth < [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> wrote: 

    Asif,

e1000g1:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
       zone zone2
inet 36.15.189.77 <http://36.15.189.77> netmask ffffff00 broadcast 63.171.189.255 <http://63.171.189.255> 

    Your broadcast address is wrong, shouldn't be  36.15.189.255
    <http://36.15.189.255> ?



    Asif Iqbal wrote:


On 8/31/07, Steffen Weiberle <[EMAIL PROTECTED]> <mailto:[EMAIL PROTECTED]> 
wrote:

Can you ping it from 'testzone'? It is configured on the same
interface, e1000g1.

Exact same problem w/ testzone. I cannot ping the default gw



Asif Iqbal wrote:

Hi All

I have a global zone and two non-global zones on same ip segment. I
can ping the default gw from global zone and zone1. But  I cannot ping
the gw from zone2. Any idea what could be the problem?


Here is my setup.

ifconfig -a on global

lo0: flags=2001000848<LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 <http://127.0.0.1> netmask ff000000 
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL>
mtu 8232 index 1
       zone zone1
inet 127.0.0.1 <http://127.0.0.1> netmask ff000000 
lo0:2: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL>
mtu 8232 index 1
       zone testzone
inet 127.0.0.1 <http://127.0.0.1> netmask ff000000 
lo0:3: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL>
mtu 8232 index 1
       zone zone2
inet 127.0.0.1 <http://127.0.0.1> netmask ff000000 
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 36.15.189.55 <http://36.15.189.55> netmask ffffff00 broadcast 36.15.189.255 <http://36.15.189.255> 
       ether 0:14:4f:3f:eb:30
e1000g1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6

       inet 0.0.0.0 <http://0.0.0.0> netmask 0
       ether 0:14:4f:3f:eb:31
e1000g1:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6

       zone testzone
inet 36.15.189.21 <http://36.15.189.21> netmask ffffff00 broadcast 36.15.189.255 <http://36.15.189.255> 
e1000g1:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
       zone zone2
inet 36.15.189.77 <http://36.15.189.77> netmask ffffff00 broadcast 63.171.189.255 <http://63.171.189.255> 
e1000g2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 8
inet 10.0.0.11 <http://10.0.0.11> netmask ff000000 broadcast 10.255.255.255 <http://10.255.255.255> 
       ether 0:14:4f:3f:eb:32
e1000g3: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
inet 192.168.1.1 <http://192.168.1.1> netmask ffffff00 broadcast 192.168.1.255 <http://192.168.1.255> 
       ether 0:14:4f:3f:eb:33
e1000g3:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7

       zone zone1
inet 36.15.189.15 <http://36.15.189.15> netmask ffffff00 broadcast 36.15.189.255 <http://36.15.189.255> 
e1000g3:2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
       zone zone1
inet 192.168.1.1 <http://192.168.1.1> netmask ffffff00 broadcast 192.168.1.255 <http://192.168.1.255> 

netstat -nr on global
Routing Table: IPv4
 Destination           Gateway           Flags  Ref   Use   Interface

-------------------- -------------------- ----- ----- ------ ---------
36.15.189.0 <http://36.15.189.0> 36.15.189.55 <http://36.15.189.55> U 1 47174 e1000g0 224.0.0.0 <http://224.0.0.0> 36.15.189.55 <http://36.15.189.55> U 1 0 e1000g0 
default              36.15.189.254 <http://36.15.189.254>       UG        1  
67052


netstat -nr on zone1
Routing Table: IPv4
 Destination           Gateway           Flags  Ref   Use   Interface
-------------------- -------------------- ----- ----- ------ ---------

36.15.189.0 <http://36.15.189.0>         36.15.189.15 <http://36.15.189.15>     
   U         1   6328 e1000g3:1

224.0.0.0 <http://224.0.0.0>            36.15.189.15 <http://36.15.189.15>      
  U         1      0 e1000g3:1
default 36.15.189.254 <http://36.15.189.254> UG 1 67062 127.0.0.1 <http://127.0.0.1> 127.0.0.1 <http://127.0.0.1> UH 3 8152 lo0:1 

netstat -nr on zone2
Routing Table: IPv4
 Destination           Gateway           Flags  Ref   Use   Interface
-------------------- -------------------- ----- ----- ------ ---------
36.15.189.0 <http://36.15.189.0> 36.15.189.77 <http://36.15.189.77> U 1 4 e1000g1:2 224.0.0.0 <http://224.0.0.0> 36.15.189.77 <http://36.15.189.77> U 1 0 e1000g1:2 
default              36.15.189.254 <http://36.15.189.254>       UG        1  
67178
127.0.0.1 <http://127.0.0.1> 127.0.0.1 <http://127.0.0.1> UH 4 38 lo0:3 


I can ping the GW 36.15.189.254 <http://36.15.189.254> from global zone and 
zone1, but not from zone2
-- 



--
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu <http://pgp.mit.edu>




--


_______________________________________________
zones-discuss mailing list
[email protected]

Reply via email to