Mike Gerdts writes:
> On Tue, Mar 4, 2008 at 3:31 AM, Enda O'Connor <[EMAIL PROTECTED]> wrote:
> > Hi
> >  For the ce driver you will need
> >  137042-01 SPACR
> >  137043-01  X86
> >  which fix CR 6616075 ( ON Part )
> >
> >  as well as
> >  118777-12 SPARC
> >  118778-12  x86
> >  which fix CR 6606507  the ce driver side.
> 
> Keep in mind that to use exclusive IP's each zone will need its own
> physical network.  That is if you have a network used only by the
> global zone and a different network shared by two or more non-global
> zones, you will need to have a physical network interface per
> non-global zone.

Almost.  You need a separate VLAN to assign for each zone.  The
"exclusive IP" feature allows you to put a VLAN into a zone, not the
whole physical interface.

The distinction is a bit confusing because the default VLAN for an
interface is effectively ID zero -- no VLAN header at all, as long as
no CoS bits are set -- and that can be placed into a non-global zone.

-- 
James Carlson, Solaris Networking              <[EMAIL PROTECTED]>
Sun Microsystems / 35 Network Drive        71.232W   Vox +1 781 442 2084
MS UBUR02-212 / Burlington MA 01803-2757   42.496N   Fax +1 781 442 1677
_______________________________________________
zones-discuss mailing list
zones-discuss@opensolaris.org

Reply via email to