James Carlson wrote:
> Mike Gerdts writes:
>>On Tue, Mar 4, 2008 at 3:31 AM, Enda O'Connor <[EMAIL PROTECTED]> wrote:
>>> For the ce driver you will need
>>> 137042-01 SPACR
>>> 137043-01  X86
>>> which fix CR 6616075 ( ON Part )
>>> as well as
>>> 118777-12 SPARC
>>> 118778-12  x86
>>> which fix CR 6606507  the ce driver side.
>>Keep in mind that to use exclusive IP's each zone will need its own
>>physical network.  That is if you have a network used only by the
>>global zone and a different network shared by two or more non-global
>>zones, you will need to have a physical network interface per
>>non-global zone.
> Almost.  You need a separate VLAN to assign for each zone.  The
> "exclusive IP" feature allows you to put a VLAN into a zone, not the
> whole physical interface.

I have an example of this on blogs.sun.com/stw/ dated early Nov 2007.

Does anyone know whether it is possible to 'bridge' [a subset of] VLANs in a 
switch, to 
put more links on the same broadcast domain?


> The distinction is a bit confusing because the default VLAN for an
> interface is effectively ID zero -- no VLAN header at all, as long as
> no CoS bits are set -- and that can be placed into a non-global zone.
zones-discuss mailing list

Reply via email to